Ultrasonic test equipment for non destructive weld testing of steel tubes
 

 Generally sited  on line in the sizing mill of Electric Weld mills and suitable for tube diameters in the range 90 – 220mm; this ultrasonic inspection unit can carry 2 or 4 transducers mounted in contact shoe probe blocks. The individual trailing arm probe assemblies have automatic lift systems for negotiating windows cut in the tube and in addition there is combined raise/lower system to accommodate traversing off line onto the calibration stand. The whole unit is adjustable in height to accommodate the different diameter tubes produced. The probe assemblies are mounted on a tracking arc which allows automatic circumferential positional adjustment in the event of any weld wander. An on board camera is used to provide visual recognition to the welding operator of any weld wander.

Contact Information:          Telephone (+44) 1536 406664   Fax   (+44) 1536 266635    E-mail General Enquiries
Postal  Address: Unicorn Automation (NDT) Ltd. Cavendish Courtyard Weldon North Industrial Estate, Corby, Northants NN17 5DZ,UK
Registered in England No. 2824838   Copyright © 2003-2007 Unicorn Automation (NDT) Ltd.